The ODOT IP67 IO‑Link series are high‑protection remote I/O devices that comprises of Master and Slaves modules and connect IO‑Link sensors/actuators directly to industrial networks such as PROFINET or EtherCAT. It supports the latest IO-Link V1.1.4 standard to provide efficient and reliable communication control for sensors and actuators.

The ICP DAS ECAT-2601 is a proven and reliable protocol converter gateway module that enables seamless connectivity between EtherCAT and Modbus/OPC UA networks.

Acting as an EtherCAT MainDevice, the ECAT-2601 allows I/O data to be exchanged between the two networks efficiently. It provides a data exchange buffer that enables EtherCAT and Modbus/OPC UA systems to exchange data quickly and easily, supporting a wide range of industrial automation applications.

The Rextron MKAG-8KT3114 is a 4 Ports 8K HDMI KVM Switch with USB 3.2 Gen 2, HDCP Engine, EDID Management, serial control, and audio embed/extract that support resolutions up to 7680×4320@60Hz ( 4:4:4, DSC ).

The built-in advanced HDCP Engine prevents misalignment issues among port switching and dedicated USB port on the front and rear side of the KVM unit is suitable for both long-term and temporary USB peripherals access.

The PLANET SGS-6341-24P6X Layer 3 PoE Stackable Managed Gigabit Switch provides high-density performance, Layer 3 static routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). With 168Gbps switching fabric, the SGS-6341-24P6X can handle extremely large amounts of data in a secure topology linking to an enterprise backbone or high capacity servers.

The ICP DAS iSN-701X series modules are vibration signal converters equipped with Ethernet and RS-485 communication interfaces. They feature a built-in 4 mA excitation current for powering integrated electronic piezoelectric (IEPE) accelerometers, along with a 24-bit A/D converter.

The ICP DAS DL-1000 data logger can measure the concentration of particles in the air and various gas concentrations related to human health can also be measured. In addition, DL-1000 can record data and send alarm when concentration is too high.

The DL-1000 has used and proven to effectively monitor concentration of particles (PM1, PN2.5, PM10), particle count (0.3μm, 0.5μm, 1μm, 2.5μm, 5μm, 10μm) and various gases such as CO/ CO2/ O2/ HCHO/ TVOC/ NH3/ H2S/ SO2 

The PLANET UPOE-2400XG provides the easiest way to power your Ethernet devices such as IP camera on the ceiling and the wireless access point installed on the top of the building. With 24 10/100/1000/2.5G/5G/10GBASE-T Gigabit Ethernet ports, the UPOE-2400XG supports full 54V DC power for any remote IEEE 802.3at/IEEE 802.3bt powered device (PD).

The Rextron USW-T334 USB-C Switcher allows the user to share one set of keyboard, mouse, 3.5mm audio, and 10Gbps USB peripherals among four USB Type-C Computers. The Real-time USB HID ports give users amazing switching experience, simply issuing hotkey commands or pressing one button to select your desired PC (USB Host) for access control.

The ICP DAS SG-3000 series signal conditioning module supports a wide variety of sensors, including current, voltage, thermocouples, resistance temperature detectors (RTDs), strain gauges, and vibration (IEPE accelerometers). It filters, isolates, amplifies, and converts input signals to voltage or current outputs suitable for measurement.

The ODOT DU03L I/O system is an innovative industrial controller that features a high-speed, redundant backplane bus, removable terminal blocks for easy installation and maintenance, and an integrated LCD display on each module for real-time diagnostics.

It provides IPv6 / IPv4 dual stack management and built-in L2/L4 Gigabit Switching engine along with 8 BNC ports with Long Reach PoE Injector function, 2 Gigabit copper ports and 2 extra 100/1000BASE-X SFP fiber slots. Each of the eight BNC ports provides 36 watts of power with a total power budget of up to 240 watts.