Established since 2003 and located in Taiwan, Cermate Technologies Inc has been manufacturing innovative products to help users develop safer and more advanced HMI solutions, with greater efficiency and ease to maintain industry 4.0 standards.

The I-3591 is a M-Bus repeater developed by ICP DAS to strengthen the driving ability of M-Bus, extend the communication distance of M-Bus and reshape the signal waveform, and also provides the M-Bus master with better communication capabilities.

The ICP DAS tSG-3781B/L is a compact single-channel DC current input signal conditioning module that converts 4~20mA current input to PWM output. The PWM output has a duty cycle of 0%~100% and performs a linear conversion of the 4~20mA current input. The PWM output frequency is adjustable from 600Hz to 800Hz via push buttons.

The AXP-9000-IoT series are Windows 10 IoT- based PACs that combines computing, I/O, and operator interface into a single module. These smart automation controllers provide the perfect solution for integrating HMI, data acquisition, and control into a single compact box.

The PET-AR400 is a high speed data acquisition device with a built-in Ethernet communication port for data transfer over a network, and includes four high-speed 24-bit differential IEPE input channels (128 kHz sample-and-hold @ one channels).

The ICP DAS tGW-700 series of Modbus TCP to Modbus RTU  converter or Modbus ASCII gateway allows Modbus TCP host to communicate with Modbus RTU/ASCII serial devices over Ethernet network; eliminating the cable length limitations of traditional serial communication equipment.

The FEMA I4P signal converter is multifunction device that can be easily configured to read 4/20 mA and 0/10 Vdc process signals, potentiometers, resistances, and a wide range of temperature sensors,

The ICP DAS iWSN-9603 series of intelligent wireless 3-phase AC smart power meters are specifically designed for power consumption measurement and monitoring in remote locations where cabling is challenging and expensive.

OKSA Automation Limited offers a wide range of industrial-grade Ethernet I/O modules.

The SUNIX industrial DevicePort remote I/O modules uses SUNIX EAZInet networking technology, and does not require IP setting and supports full network technology.

The ICP DAS NSM-205PFx -24V series of compact PoE industrial Ethernet switches has been launched.

The NSM-205PFx series are 4-port Power over Ethernet (PoE) unmanaged Ethernet switches that enable data signals and electrical power transmitted via Ethernet cable simultaneously; which offer more effective solutions for connecting numerous PoE compatible devices such as VoIP, IP cameras and access points – meeting the demands of industrial applications.