The ECAT-2016-3 is an EtherCAT I/O module that is equipped with 3 channel analog input with 16-bit resolution that allows direction connection of a resistor bridge. This compact I/O EtherCAT module can be easily integrated with SCADA applications using a daisy chain connection via the dual RJ45 ports and support network topology such as star, line or ring. 

The PCIe-S142i communication card provides two RS-422/485 serial ports, where each port is equipped with a 256-byte hardware FIFO with speed up to 921600 bps. 

The ET-7217RMS/PET-7217RMS is a high accuracy and RMS-to-DC converter which can compute the true RMS value of any complex waveform. These multifunction modules are equipped with 8 differential AC Input channels and 4 Digital Output channels. The RMS input range can be selected for each channel from +150 mVrms to +10 Vrms, and each channel can be configured individually.

The iNS-306 is a 6-Port IIoT switch that support Power-over-Ethernet on ports 1 to 4. This switch is classified as power source equipment (PSE), and when used in this way, the iNS-306 PoE switch enable centralisation of the power supply; providing up to 30 Watts. Also, the iNS-306 can be used to power IEEE 802.3af/at standard devices (PD).

The OKSA Automation Limited are pleased to announce a new partnership with ODOT Automation System Co., Ltd, a leading industrial internet of things (IIOT), remote I/O and protocol converters manufacturer.

The ECAT-251x series are EtherCAT junction slave devices that are specifically designed to aid flexible wiring via branch and daisy chain topologies in industrial EtherCAT applications. These EtherCAT junction devices are equipped with a powerful microcontroller that efficiently manages network traffic and up to six Ethernet ports that aids the communication between the EtherCAT master controller and EtherCAT I/O devices.

The G-4510 series are compact machine-to-machine (M2M) programmable automation controllers (PAC) that are specifically designed for remote monitoring and control applications such as hydrologic/wind monitoring, asset management and tracking system.

The ICP DAS IEC850-211-S allows IEC-61850 MMS clients to access Modbus TCP network as a Modus TCP client. The IEC-61850 communication protocol is specifically designed for intelligent electronic devices at electrical substations. The IEDs exchange information with other IEDs or SCADA via IEC-61850 protocol for protection and control devices.

The ICP DAS PET/ET-7065 are Ethernet remote I/O modules that are equipped with six wet contact digital input channels and six PhotoMOS relay outputs; where each digital input channel can be used as a 32-bit counter. These I/O modules can be remotely controlled via Modbus TCP/UPD protocol over Ethernet network and an ideal solution for SCADA software integration.

The tSH-700 module is a serial port sharers equipped with a number of functions including baud rate Conversion, Modbus RTU/ASCII conversion and Two Masters share One Slave. The built-in web server provides easy configuration interface, and no console commands are required.